Additional Information

200mm Core Drill Arbor With SDS+ Shank Blue Spot 19508

Diamond core drill bits are suitable for drilling most common building materials such as concrete, brick paving slabs, asphalt, limestone, clay bricks and aerated block. A diamond corer will cut clean accurate holes producing exact size holes with almost no break out. Core can be removed in one piece avoiding the need for making good by a brick layer or plasterer. Unlike traditional carbide tipped core drills diamond core drills require no hammer or percussion action when drilling. When boring a hole with a diamond corer, the corer is mounted on an arbor. The arbor may have an SDS or a hex fitting appropriate to the drill or chuck used. In order to centre the corer a tapered drill bit is used to centre the boring hole and stop it wandering.

Applications for use:
1. For use with SDS power drill for dry cutting.
2. Chuck must be clean, chuck should fit shank of core drill.
3. The direction of rotation of core drill is clockwise.
4. Avoid strong drilling pressure.
5. Chip expelled from the slot in the core drill body.
6. Avoid tilting and oscillating of core drill during operation.
7. Avoid overheating. For cooling stop every 60-80 seconds.
8. In case of rotating sparks core drill should be resharpened by cutting in sandstone or asphalt or using with water.
9. This product is not to be used on the hammer function.
10. This product is a consumable item. No guarantee can be granted in case of improper use.