Additional Information

Hydraulic Bench Press 10 Tonne Draper 58157 HBP/10

Before attempting to operate the Draper 58157 HBP/10 Hydraulic Bench Press 10Tonne, carefully read through the entire instruction manual, to understand the applications limitations and potential hazards associated with this bench press. Failure to do so could lead to serious personal injury. Take  note of the important safety instructions. Your hydraulic press has many features that will make your job faster and easier. Performance and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Draper hydraulic presses have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship for a period of 12 months from the date of purchase.

Hydraulic presses are potentially dangerous equipment, which if not used correctly can cause serious injury to the user. The user bears sole responsibility for any damage or injury that may result from the use of the bench press for any purpose other than it was intended. Presses should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the press.

KNOW YOUR HYDRAULIC PRESS
Read and understand the owner’s manual and labels affixed to the tool. Learn its application
and limitations as well as the specific potential hazards peculiar to this tool.

KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents. Floors must not be slippery due to oil or sawdust.

KEEP CHILDREN AWAY
All visitors should be kept a safe distance from work area.

WEAR PROPER CLOTHING
Do not wear loose clothing, neckties or jewellery (rings, wristwatches) to catch in parts.NONSLIP footwear is recommended. Roll long sleeves above the elbow.

USE SAFETY GOGGLES (Head Protection)
Wear CE approved safety goggles at all times. Normal spectacles only have impact resistant lenses, they are NOT safety glasses. Also, use face or dust mask if application is dusty.

STAY ALERT
Always watch what you are doing and use common sense. Do not operate a tool when you are tired or under the influence of alcohol or drugs.

NEVER STAND ON TOOL
Do not store materials above or near the tool, so that it is necessary to stand on the tool to reach them.

CHECK DAMAGED PARTS
Check for damage to parts, breakage of parts, mountings and any other conditions that may affect its operation. A part that is damaged should be properly repaired or replaced.

MAINTAIN TOOLS WITH CARE
Keep tools clean for the best and safest performance. Follow instructions for lubricating and changing accessories. Always keep the hand grips on the tool clean, dry and free of oil and grease.

USE RECOMMENDED ACCESSORIES
Consult the owners manual for recommended accessories. Follow the instructions that accompany the accessories.The use of improper accessories may cause hazards.

SECURE WORK
Use clamps or a vice to hold work.

DO NOT OVERREACH
Keep proper footing and balance at all times.

USE RIGHT TOOL
Do not force the tool or attachment to do a job
for which it was not designed.

DO NOT FORCE TOOL
It will do the job better and safer at the rate
for which it was designed.

IMPORTANT NOTE
Residual Risk. Although the safety instructions and operating manuals for our tools contain extensive
instructions on safe working, every tool involves a certain residual risk which can not be completely
excluded by safety mechanisms.Tools must therefore always be operated with caution!

1. Never exceed the maximum load capacity of the ram.
2. Do not over extend the ram, as it is possible to force the plunger out of the top of the ram.
3. When coupler valves are disconnected always insert dust cap to keep the oil lines clean.
4. If the load is not centred to the ram plunger, pump carefully. If you have to use excessive pressure to
pump the ram, stop the operation and adjust the set-up so that the load is more central.This should
decrease the effort required.
5. Do not drop any heavy objects onto the hose, and do not allow the hose to kink.
6. Always allow clearance for the hose to avoid damage to the hose and couplers.
7. Keep the equipment away from heat or fire, as this may damage or weaken the equipment.

To see full operating instructions click on the .pdf document below.

Draper 58157 HBP/10 Hydraulic Bench Press 10 Tonne - Instructions