Additional Information

Rotary Hammer Drill Kit 900w SDS+ Draper 73397 PT900K

Supplied complete with: 8 x SDS+ drills 5-18mm, 3 x SDS+ Chisels, 6 x HSS twist drill bits, 13mm geared chuck, SDS+ chuck adaptor, accessories, carrying case and plug and 3M (approx.) of cable. Display packed. Draper 73397 PT900K SDS+ Rotary Hammer Drill Kit 900w.

Product Specifications
Draper 73397 PT900K Hammer Drill
Manufacturer Draper
Stock No. 73397
Part No. PT900K
Weight: 5.5kg
EAN Barcode: 5010559733972
GTIN Barcode: 05010559733972
Rotary Hammer Drill Kit 900w
Drilling capacities:
Mild Steel ... 13mm
Wood ... 40mm
Masonry ... 32mm
Chuck type ... SDS+
Blow energy ... 4.1joules
Speed (no lo

Before attempting to operate the Draper 73397 PT900K SDS+ Rotary Hammer Drill, carefully read through the entire instruction manual before use, to understand the applications limitations and potential hazards associated with this drill. Take special care to take note of the important safety instructions. The Draper Hammer Drill has many features that will make your job faster and easier. The drills performance and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Rotary hammer drills are potentially dangerous, and if not used correctly can cause serious injury to the user, bystanders and damage to property. The user bears sole responsibility for any damage or injury that may result from the use of the hammer drill for any purpose other than that for which it was intended. Hammer drills should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the drill.

Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating drill may result in serious personal injury.

ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension lead suitable for outdoor use.

The Royal Society for the Prevention of Accidents (RoSPA) recommends the use of an RCD to reduce the risk of fatal shock. For electrical safety it is recommended to always fit an RCD when you use power tools. You can have an RCD fitted to protect a particular circuit as part of the socket outlet between the socket outlet and the equipment being used. For greater safety when using electrical equipment use a residual current device (RCD). Care in use is still necessary.

PERSONAL SAFETY
WARNING
Two handed operation required. This machine requires the use of two hands to ensure safe operation. Wear ear protectors when using the rotary hammer drill for extended periods. Prolonged exposure to high intensity noise can cause hearing loss. Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sunglasses are NOT safety glasses. It is also highly recommended that your wear a dust mask, thickly padded gloves and safety shoes or boots for appropriate conditions to reduce the risk of personal injuries. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Remove any adjusting key or wrench before turning the power tool on. Do not overreach. Keep proper footing and balance at all times.

See .pdf documents below for full details of parts and instructions.

Draper 73397 SDS+ Rotary Hammer Drill Kit - Instructions

Draper 73397 SDS+ Rotary Hammer Drill Kit - Parts