Additional Information

Gas/No-Gas MIG Welder 150Amp 230V Sealey MIGHTYMIG150

This unit is set up ready to go in gasless mode but can also be switched easily to use with gas by a simple change of polarity and purchase of a Gas Conversion Kit - Model No. 120.802032. Supplied with comfort grip non-live torch, 1.8mtr earth cable, 1mtr gas hose, 0.45kg flux cored wire and 0.9mm contact tip. One of our professional MIGHTYMIG range this compact gas/no-gas welder offers excellent performance at an extremely competitive price. Sealey MIGHTYMIG150 Gas/No-Gas MIG Welder 150Amp 230V.

Product Specifications
Sealey MIGHTYMIG150 Gas/No-Gas MIG Welder 150Amp 230V
Manufacturer Sealey
Model No: MIGHTYMIG150
Model ID: 15151
Weight: 26kg
EAN Barcode: 5051747432659
GTIN Barcode: 05051747432659
Maximum Current: 150A
Wire Capacity: 0.9kg
Duty Cycle: 100% @ 30A, 15% @ 105A
Cooling System: Forced Air
Torch: Non-Live
Power Input: 230V - 1ph
Absorbed Power: 4.5kW
Case Size: Medium
Gasless Consumables:
Flux cored Wire (0.9kg x Ø0.9mm): TG100/1
Replacement Tips (Pack of 5): TG100/2
For use with 0.9kg Gasless and 0.7kg Mild Steel Wire Reels only.

Sealey’s MIGHTYMIG150 is designed to work in a demanding professional environment. With the application of stringent design parameters and utilising high performance, modern materials and manufacturing processes, Sealey’s mig welders have been developed for optimum functionality and practical application. Sealey’s ethos of “Quality Products at Competitive Prices with a Professional Back-up Service” is renowned for being the best in the business. All Sealey welders are covered by a minimum 1 year parts and labour guarantee.

Before attempting to operate the Sealey MIGHTYMIG150 Gas/No-Gas MIG Welder 150Amp 230V, carefully read through the entire instruction manual, to understand the applications limitations and potential hazards associated with this welder. Failure to do so could lead to serious personal injury. Take note of the important safety instructions. Your mig welder has many features that will make your job faster and easier. Performance and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Welders are potentially dangerous equipment, which if not used correctly can cause serious injury to the user. The user bears sole responsibility for any damage or injury that may result from the use of the welder for any purpose other than it was intended. Welders should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the welder.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension lead suitable for outdoor use.

The Royal Society for the Prevention of Accidents (RoSPA) recommends the use of an RCD to reduce the risk of fatal shock. For electrical safety it is recommended to always fit an RCD when you use power tools. You can have an RCD fitted to protect a particular circuit as part of the socket outlet between the socket outlet and the equipment being used. For greater safety when using electrical equipment use a residual current device (RCD). Care in use is still necessary.

SAFETY NOTE
WARNING! Always wear an approved welding mask when operating a welder. Also wear CE approved safety glasses to provide additional protection against flying particles, splash, spray and spatter. Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating the welder may result in serious personal injury.

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a dealers.network of local, independent  These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 2000 other quality products available.

See .pdf documents below for full details of parts and instructions.

 Sealey MIGHTYMIG150 Gas/No-Gas MIG Welder 150Amp 230V - Instructions

 Sealey MIGHTYMIG150 Gas/No-Gas MIG Welder 150Amp 230V - Parts