Additional Information

Sander Polisher Sealey MS900PS

Sealey tools are designed and manufactured from the highest quality components. Sealey products are suitable for the professional whether you are in the Automotive, Industrial, Engineering, Agricultural sector or a serious DIY enthusiast. The Sealey MS900PS Sander Polisher 170mm 6-Speed 1100w is covered by a one year guarantee.

Before attempting to operate the Sealey MS900PS sander polisher the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. It is important to read the instruction manual to understand the application, limitations and potential hazards associated with this tool.

Sander polishers are potentially dangerous machines, which if not used correctly can cause serious injury to the user, bystanders and damage to property.

This Sealey sander polisher is intended for sanding and polishing purposes only and should not under any circumstances be used for any other purpose.

The user bears sole responsibility for any damage or injury that may result from the use of the sander polisher for any purpose other than that for which it was intended.

The Sealey sander polisher should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of this power tool.

Always ensure that the sander polisher is disconnected from the mains before carrying out any maintenance, cleaning, replacement of pads, or any adjustments or maintenance.

Under normal operation, the sander polisher will produce vibration. Securing screws can vibrate loose easily, causing a breakdown or accident. Check the tightness of all screws carefully before and during operation.

PERSONAL SAFETY

Two handed operation required. This machine requires the use of two hands to ensure safe operation. Wear approved eye safety protection, ear defenders and, if dust is generated,
respiratory protection.

Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and contain and/ or tie back long hair.

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Avoid accidental starting. Ensure the switch is in the off position before plugging in. Remove any adjusting key or wrench before turning the power tool on. Do not overreach.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension lead suitable for outdoor use.

The Royal Society for the Prevention of Accidents (RoSPA) recommends the use of an RCD to reduce the risk of fatal shock. For electrical safety it is recommended to always fit an RCD when you use power tools. You can have an RCD fitted to protect a particular circuit as part of the socket outlet between the socket outlet and the equipment being used. For greater safety when using electrical equipment use a residual current device (RCD). Care in use is still necessary.

Sealey MS900PS Sander Polisher 170mm 6-Speed 1100w Instructions

Sealey MS900PS Sander Polisher 170mm 6-Speed 1100w Parts