Additional Information

Auto Probe Plus 6-24V Sealey PPX

Watch the video!



Polarity test. Power up components prior to fitting including: Cooling fan motors Fuel pumps Window/Sunroof motors Relays and Lamps Wiper motors Tests continuity in:
Switches Diodes and Fuses Relays Wiring harnesses Detect short circuits. Locate bad earths quickly. All the features of the Auto Probe but with an integral work light to aid use in dark engine bays plus an audible circuit tester for when the LED on the probe cannot be seen. Sealey PPX

Product Specifications
Sealey PPX Auto Probe Plus 6-24V
Manufacturer Sealey
Model No: PPX
Model ID: 8522
Weight: 0.5kg
EAN Barcode: 5024209350648
GTIN Barcode: 05024209350648

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 2000 other quality products available.

Instructions for use
Switch funtions
Positive on probe - Push switch forward
Negative on probe - Push switch backwards
Polarity check - Don’t press switch

Worklight
Hook up battery clips
Touch earth clip to stud (above LED) to switch on
Repeat to switch off

Testing trailer lights
Attach earth clip to an earth
Apply probe to point
Red Led = positive
Test points as required

To energise component
Hook up battery clips
Apply probe to positive point of component
Use ground lead to apply ground
Push switch forward

To check continuity
Hook up battery clips
Apply probe to one end
Apply ground lead to other end
LED on = continuity

Energising components out of vehicles
Hook up battery clips
Apply probe to positve point
Apply ground lead to other end
Push switch forward
If good, component will operate