Additional Information

Welding Helmet Solar Powered-Blue Sealey PWH699B

Watch the video!

All models feature deluxe contoured helmets approved to BSEN175 which give full neck protection and protects lens from scratching when helmet is laid down. Comfortable headband and non-slip quick release ratchet mechanism. Suitable for MIG and arc welding. High quality lenses with large viewing area manufactured and tested to BSEN379. Shade 11 on PWH199 and variable shade 9-13 on PWH599 and PWH699. Fully automatic switching from light to dark on striking arc. Fitted with solar power panel - no batteries required. PWH699 features infinitely adjustable sensitivity and delay switches. PWH699 Range has a special grinding feature enabling the user to grind without having to remove the mask, still offering a full face protection. Sealey PWH699B

Product Specifications
Sealey PWH699B Welding Helmet
Manufacturer Sealey 
Model No: PWH699B
Model ID: 15463
EAN Barcode: 5051747472112
GTIN Barcode: 05051747472112
Shade Active: 9-13 Variable
Shade Inactive: 4
Viewing Area: 97 x 47mm
UV/IR Protection: Yes
Operating Time:
Light/Dark: 0.025ms
Temperature Range: -10°C to +55°C
Power: Solar Cells
Colour: Blue

ADJUSTING THE FIT OF THE WELDING HELMET.
The overall circumference of the headband can be made larger or smaller by pushing in and rotating the knob on the back of the headband. This can be done whilst wearing the helmet and allows just the right tension to be set to keep the helmet firmly on the head without it being too tight. If the headband is riding too high or too low on your head adjust the strap which passes over the top of your head. To do this release the end of the band by pushing the locking pip out of the hole in the band. Slide the two portions of the band to a greater or lesser width as required and push the locking pip through the nearest hole. Test the fit of the headband by lifting up and closing down the welding helmet a few times whilst wearing it. If the headband moves whilst tilting re-adjust it until it is stable.

SELECTING DELAY TIME/RESPONSE TIME
The delay time in which it takes the lens to change from dark to light or vice versa can be varied from 0.1 sec to 1 sec, this adjustment is carried out by turning the delay time knob on the inside of the lens.

SELECTING SHADE LEVEL
Fitted with solar powered panel so no batteries are required. Refer to the shade guide and adjust the knob on the side of the helmet to the correct setting.

SELECTING THE GRIND OPTION
When the shade knob is turned to the “grind” position the shade function is turned off allowing a clear view to grind a weld with the helmet providing face protection. Ensure that the shade function is turned back on before welding again.

SAFETY NOTE
WARNING! Always wear an approved welding mask when operating a welder. Also wear CE approved safety glasses to provide additional protection against flying particles, splash, spray and spatter. Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating the welder may result in serious personal injury.

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

See .pdf documents below for full details of parts and instructions.

Sealey PWH699B Welding Helmet Solar Powered Shade 9-13 Blue - Instructions

Sealey PWH699B Welding Helmet Solar Powered Shade 9-13 Blue - Parts