Additional Information

Air Filter Regulator Sealey SA2001/FR

Suitable for most workshop air supply set-ups.
Die-cast control heads with clear polycarbonate bowls.
Regulator assembly features locking control knob for pre-setting air pressure and large, easy-to-read pressure gauge.
Filter is fitted with automatic drain tap.
Lubricator includes oil/air mix control and sight glass.
Filter and Lubricator are fitted with protection bowl cage.
Supplied with 1/2" Male-1/4"Female Adaptors and wall bracket. Sealey SA2001/FR

Product Specifications
Sealey SA2001/FR Air Filter Regulator
Manufacturer Sealey
Model No: SA2001/FR
Model ID: 8943
EAN Barcode: 5024209500562
GTIN Barcode: 05024209500562
Air Filter Regulator with Gauge Heavy Duty 
Port Size: 1/2" BSP
Maximum Supply Pressure: 150psi
Maximum Outlet Pressure: 125psi
Maximum Air Flow *: 28cfm
*Supply Pressure of 100psi

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

An air filter is a device which removes contaminants from a compressed air stream. Moisture can condense in the air compressor so it is extremely important to drain the tank after each days use, also the filter regulator should be drained. If left in the tank moisture could accumulate and corrode the inside of the tank, also this moisture and corrosion particles could find their way along the airline and into the tool affecting the performance of the tool. If these steps are carried out the working life of the tool will be prolonged. This will ensure optimum performance. Safety glasses should always be worn when working with air tools to protect from flying debris such as particles of metal, rust, dirt and grime.

The SA2001 series filter, regulator and lubricator are designed to provide clean, filtered air (filter), easy and reliable pressure control (regulator) and automatic mist lubrication for tools (lubricator). Filter and lubricator have polycarbonate bowls protected by bowl guards.

Filter - The bowl will automatically drain each time the system pressure drops to zero. However, if the fluid level reaches the maximum mark but the system is to remain pressurised the bowl can be manually drained by pushing the drain stub upward. Note that the stub is designed to take a flexible tube so that the waste fluid can be piped away.

Regulator - The output pressure is controlled by the knob. Before pressurising air system for the first time lift and rotate knob anticlockwise to remove any loading on the regulator spring. Pressurise the system and then rotate knob clockwise to set required output pressure, as shown on gauge. When the required pressure is achieved lock knob by pushing down. Note: For correct pressure setting always adjust upwards from a lower pressure. Therefore to reset from 90 to 70psi, for example, reduce pressure from 90 to 60psi and then increase from 60 to 70psi.

Lubricator - Remove filler plug and fill bowl with air tool oil. This can be done with air line pressurised. With air flowing through the lubricator the oil delivery rate can be adjusted by the screw’ whilst watching the drip rate through the sight dome. The oil delivery rate will be automatically increased or decreased in line with the air flow.

See .pdf documents below for full instructions.

Sealey SA2001/FR Air Filter Regulator with Gauge Heavy Duty - Instructions