Additional Information

Air Impact Wrench 1/2”Sq Drive Heavy-Duty Sealey SA3/S

Features four-position adjustable air/torque control and reversible action. Superior quality wrench suitable for garage and tyre-shop use. Fitted with rocking-dog hammer mechanism with hardened anvil and cage. Sealey SA3/S

Product Specifications
Sealey SA3/S Air Impact Wrench
Manufacturer Sealey
Model No: SA3/S
EAN Barcode: 5024209080088
GTIN Barcode: 05024209080088
Drive: 1/2”Sq
Working/Maximum Torque: 350/400lb.ft
Ultimate Torque: 470lb.ft
Air Consumption: 4cfm
Operating Pressure: 90psi
Air Inlet Size: 1/4”BSP
Weight: 2.5kg

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 7100 other quality products available.

Traditional designs and proven workshop reliability define Sealey’s Workshop range. These tools represent the very best value in everyday air tools yet are supported by Sealey’s after-sales service in exactly the same way as the high-end Premier range. The Sealey SA3/S Air Impact Wrench 1/2”Sq Drive Heavy-Duty is covered by a 1 year parts and labour guarantee.

Before attempting to operate the Sealey SA3/S Air Impact Wrench 1/2” Sq Drive, carefully read through the entire instruction manual before use, to understand the applications limitations and potential hazards associated with this wrench. Take special care to take note of the important safety instructions. The Sealey air wrench has many features that will make your job faster and easier.

Whether you are a mechanic, engineer or serious about DIY, air impact wrench are an essential piece of equipment when installing and removing nuts and bolts. Not only do they speed up productivity, they will reduce the time necessary to complete the task in hand, thereby saving time and money.

Air impact wrenches are potentially dangerous, and if not used correctly can cause serious injury to the user, bystanders and damage to property. The user bears sole responsibility for any damage or injury that may result from the use of the wrench for any purpose other than that for which it was intended. Air impact wrenches should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the air tool.

Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating impact wrench may result in serious personal injury.

Air tools require lubricant so that the internal moving parts are lubricated. This can be done by placing a few drops of oil in the air inlet fitting on the bottom of the tool. This should be done on a daily basis or whenever the tool is used. It is also recommended that an air filter lubricator is used. An air filter is a device which removes contaminants from a compressed air stream. Moisture can condense in the air compressor so it is extremely important to drain the tank after each days use, also the filter regulator. If left in the tank moisture could accumulate and rust and weaken the tank, also this moisture could find its way along the airline and into the tool and affect the performance of the tool. If these steps are carried out the working life of the tool will be prolonged. This will ensure optimum performance. Safety glasses should always be worn when working with air tools to protect from flying debris such as particles of metal, rust, dirt and grime. Two handed operation required. This machine requires the use of two hands to ensure safe operation.

Couplings.
Vibration may cause failure if a quick change coupling is connected directly to the wrench. To overcome this, connect a leader hose to the wrench. A quick change coupling may then be used to connect the leader hose to the air line recoil hose

Take care when selecting tools for use with the compressor. Air tool manufacturers normally express the volume of air required to operate a tool in cubic feet per minute (cfm). This refers to free air delivered by the compressor (‘air out’) which varies according to the pressure setting. Do not confuse this with the compressor displacement which is the air taken in by the compressor (‘air in’). ‘Air out’ is always less than ‘air in’ due to losses within the compressor. Be sure to take into account the CFM (Cubic Feet per Minute) requirements of your air tool, which will need to be lower than the CFM of your compressor. High CFM ratings mean a compressor can provide more air, making higher CFM units more practical for larger applications.

See .pdf documents below for full details of parts and instructions.

Sealey SA3/S Air Impact Wrench 1/2”Sq Drive Heavy-Duty - Instructions

Sealey SA3/S Air Impact Wrench 1/2”Sq Drive Heavy-Duty - Parts