Additional Information

Air Power Shears Sealey SA53

Palm throttle control and alloy head and housing. Blades are consumable items and are not covered by warranty. Suitable for cutting straight lines in metal sheet. Sealey SA53 Air Power Shears.

Product Specifications
Sealey SA53 Air Power Shears
Manufacturer Sealey
Model No: SA53
Model ID: 9046
Weight: 1kg
EAN Barcode: 5024209161954
GTIN Barcode: 05024209161954
Maximum Cutting Capacity: 1.2mm (Steel)
Air Consumption: 4cfm
Operating Pressure: 90psi
Air Inlet Size: 1/4"BSP 
Replacement Blade Right: SA53.V3-30
Replacement Blade Left: SA53.V3-31
Replacement Blade Centre: SA53.V3-32

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 2000 other quality products available.

Couplings.
Vibration may cause failure if a quick change coupling is connected directly to the air tool. To overcome this, connect a leader hose to the tool. A quick change coupling may then be used to connect the leader hose to the air line recoil hose.

Take care when selecting tools for use with the compressor. Air tool manufacturers normally express the volume of air required to operate a tool in cubic feet per minute (cfm). This refers to free air delivered by the compressor (‘air out’) which varies according to the pressure setting. Do not confuse this with the compressor displacement which is the air taken in by the compressor (‘air in’). ‘Air out’ is always less than ‘air in’ due to losses within the compressor. Be sure to take into account the CFM (Cubic Feet per Minute) requirements of your air tool, which will need to be lower than the CFM of your compressor. High CFM ratings mean a compressor can provide more air, making higher CFM units more practical for larger applications.

See .pdf documents below for full details of parts and instructions.

 Sealey SA53 Air Power Shears - Instructions

 Sealey SA53 Air Power Shears - Parts