Additional Information

Air Mini Ratchet Wrench 1/4” Sq Drive Sealey SA630

Compact design utilises high quality bearings and rotor end plates for smooth power output. Rear exhaust with baffle reduces noise and oil spray. Fitted with protective rubber ratchet head boot. Mini air wrench suitable for applications where space is at a premium. Superb for engine bay work on cars, CVs, motorcycles and outboards. Sealey SA630 Air Mini Ratchet Wrench 1/4” Sq Drive.

Product Specifications
Sealey SA630 Air Mini Ratchet Wrench
Manufacturer Sealey
Model No: SA630
Model ID: 9069
Weight: 0.5kg
EAN Barcode: 5024209141406
GTIN Barcode: 05024209141406
Drive: 1/4" Sq
Maximum Torque: 30lb.ft
Air Consumption: 5cfm
Operating Pressure: 90psi
Air Inlet Size: 1/4" BSP
Length: 175mm     

The Sealey SA630 Air Mini Ratchet Wrench 1/4” Sq Drive is from the Sealey Premier range. Sealey’s range of Premier air tools offers the very best in performance and price. Sealey specify the very highest quality components and manufacturing designs to ensure a long and durable working life and are confident that these tools offer the best value around. Premier professional air tools are backed by a one-year warranty with a free-of-charge conditional two-year warranty available.

Whether you are a mechanic, engineer or serious about DIY, air ratchet wrenches are an essential piece of equipment when installing and removing nuts and bolts. Not only do they speed up productivity, they will reduce the time necessary to complete the task in hand, thereby saving time and money.

Air ratchet wrenches are ideal for use in small confined spaces such as engine bays on cars, commercial vehicles, motor cycles and outboards as they have trigger operated power control and require less space than a conventional hand held ratchet.

Before attempting to operate the Sealey SA630 Air Mini Ratchet Wrench 1/4” Sq Drive, carefully read through the entire instruction manual before use, to understand the applications limitations and potential hazards associated with this air ratchet. Take special care to take note of the important safety instructions and warnings. Your Sealey air ratchet wrench has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Air ratchets are potentially dangerous tools, which if not used correctly can cause serious injury to the user and damage to property. The user bears sole responsibility for any damage or injury that may result from the use of the air tool for any purpose other than that for which it was intended. Air tools should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the tool.

Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating air tools may result in serious personal injury.

Air tools require lubricant so that the internal moving parts are lubricated. This can be done by placing a few drops of oil in the air inlet fitting on the bottom of the tool. This should be done on a daily basis or whenever the tool is used. It is also recommended that an air filter lubricator is used. An air filter is a device which removes contaminants from a compressed air stream. Moisture can condense in the air compressor so it is extremely important to drain the tank after each days use, also the filter regulator. If left in the tank moisture could accumulate and rust and weaken the tank, also this moisture could find its way along the airline and into the tool and affect the performance of the tool. If these steps are carried out the working life of the tool will be prolonged. This will ensure optimum performance. Safety glasses should always be worn when working with air tools to protect from flying debris such as particles of metal, rust, dirt and grime.

Take care when selecting tools for use with the compressor. Air tool manufacturers normally express the volume of air required to operate a tool in cubic feet per minute (cfm). This refers to free air delivered by the compressor (‘air out’) which varies according to the pressure setting. Do not confuse this with the compressor displacement which is the air taken in by the compressor (‘air in’). ‘Air out’ is always less than ‘air in’ due to losses within the compressor. Be sure to take into account the CFM (Cubic Feet per Minute) requirements of your air tool, which will need to be lower than the CFM of your compressor. High CFM ratings mean a compressor can provide more air, making higher CFM units more practical for larger applications.

Couplings
Vibration may cause failure if a quick change coupling is connected directly to the air tool. To overcome this, connect a leader hose to the tool. A quick change coupling may then be used to connect the leader hose to the air line recoil hose.

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 7100 other quality products available.

See .pdf documents below for full details of parts and instructions.

Sealey SA630 Air Mini Ratchet Wrench 1/4” Sq Drive Instructions

Sealey SA630 Air Mini Ratchet Wrench 1/4” Sq Drive Parts