Additional Information

Air Angle Cut-Off Tool 75mm - Long Reach Sealey SA6501

The Sealey SA6501 Long Reach Air Angle Cut-Off Tool is from the Sealey Premier range. Sealey’s range of Premier air tools offers the very best in performance and price. Sealey specify the very highest quality components and manufacturing designs to ensure a long and durable working life and are confident that these tools offer the best value around. Premier professional air tools are backed by a one-year warranty with a free-of-charge conditional two-year warranty available.

Air tools require lubricant so that the internal moving parts are lubricated. This can be done by placing a few drops of oil in the air inlet fitting on the bottom of the tool. This should be done on a daily basis or whenever the tool is used. It is also recommended that an air filter lubricator is used. An air filter is a device which removes contaminants from a compressed air stream. Moisture can condense in the air compressor so it is extremely important to drain the tank after each days use, also the filter regulator. If left in the tank moisture could accumulate and rust and weaken the tank, also this moisture could find its way along the airline and into the tool and affect the performance of the tool. If these steps are carried out the working life of the tool will be prolonged. This will ensure optimum performance. Safety glasses should always be worn when working with air tools to protect from flying debris such as particles of metal, rust, dirt and grime.

Watch the video!

Fitted with metal safety guard and throttle safety device to prevent accidental operation. Cutting disc not included. Extended reach cut-off tool is especially suitable for cutting off rear axle and exhaust tubes/brackets. Additionally suited to cutting off side frames or door sills. Sealey SA6501

Product Specifications
Sealey SA6501 Long Reach Air Angle Cut-Off Tool 75mm
Manufacturer Sealey 
Model No: SA6501
Model ID: 14135
EAN Barcode: 5024209032339
GTIN Barcode: 05024209032339
Long Reach Air Angle Cut-Off Tool 75mm
Disc size: Ø75 x 2 x 10mm
Free Speed: 19000rpm
Air Consumption: 7cfm
Operating Pressure: 90psi
Air Inlet Size: 1/4”BSP
Weight: 0.8kg
Cutting Discs: (Single) PTC/3C
(Pack of 5) PTC/3C5

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 2000 other quality products available.

Before attempting to operate the Sealey SA6501 Long Reach Air Angle Cut-Off Tool, carefully read through the entire instruction manual before use, to understand the applications limitations and potential hazards associated with this air rotary cut off tool. Take special care to take note of the important safety instructions. The Sealey air cut off tool has many features that will make your job faster and easier.

air cut off tools are potentially dangerous, and if not used correctly can cause serious injury to the user, bystanders and damage to property. The user bears sole responsibility for any damage or injury that may result from the use of the cut off tool for any purpose other than that for which it was intended. Air cut off tools should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the air tool.

Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating air cut off tools may result in serious personal injury.

Couplings
Vibration may cause failure if a quick change coupling is connected directly to the air tool. To overcome this, connect a leader hose to the tool. A quick change coupling may then be used to connect the leader hose to the air line recoil hose.

Take care when selecting tools for use with the compressor. Air tool manufacturers normally express the volume of air required to operate a tool in cubic feet per minute (cfm). This refers to free air delivered by the compressor (‘air out’) which varies according to the pressure setting. Do not confuse this with the compressor displacement which is the air taken in by the compressor (‘air in’). ‘Air out’ is always less than ‘air in’ due to losses within the compressor. Be sure to take into account the CFM (Cubic Feet per Minute) requirements of your air tool, which will need to be lower than the CFM of your compressor. High CFM ratings mean a compressor can provide more air, making higher CFM units more practical for larger applications.

See .pdf documents below for full details of parts and instructions.

Sealey SA6501 Long Reach Air Angle Cut-Off Tool 75mm Instructions

Sealey SA6501 Long Reach Air Angle Cut-Off Tool 75mm Parts