ADDITIONAL INFORMATION

Hose Pinch Tool Metal Bar Type  Sealey VS033

Metal construction with chromed finish.Suitable for both brake and fuel lines. Simple, yet effective, pinch action with rounded clamp section to prevent damage to hose lining. Sealey VS033 Hose Pinch Tool Metal Bar Type - Brake Fuel Hoses.

Product Specifications
Sealey VS033 Hose Pinch Tool Metal Bar Type
Manufacturer Sealey
Model No: VS033
Model ID: 10261
Weight: 0.25kg
EAN Barcode: 5024209351089
GTIN Barcode: 05024209351089

The Sealey VS033 Hose Clamp is designed to aid the diagnosis of hydraulic faults within the braking system, and with a few exceptions, enables the faulty unit to be located quickly.
By checking the pedal movement with all flexible hoses clamped, then removing one calmp at a time and checking the pedal each time; air in the system may be located together with the faulty unit. Even in systems where air rises to a point remote from the source of entry, the experience gained by the use of clamps will save time and brake fluid / hydraulic fluid.

Instructions for use

Release the screw, open the two legs and place the hose close to the pivot between the legs.
Squeeze the legs together, apply the clevis and tighten the screw to clamp the hose.
If the hose condition is suspect is should be replaced before any further work is done.

Most systems have three flexible hoses, one to each front wheel and one serving both rear wheels.

Using three clamps the system may be checked as follows:
1. Clamp all front and rear hoses and check pedal action.  If the pedal action is not perfect there is air in the system or the master cylinder is faulty. Rectify before proceeding.
2. If the pedal action is bad after removing the rear clamp the fault is in the rear cylinders. Rectify fault or reclamp hose if a fault is present before moving to stage 3.
3. Removal ofone or the other of the front clmaps will reveal which is the faulty front cylinder.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 2000 other quality products available.

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

For further information see the pdf document below.

  Sealey VS033 Hose Pinch Tool Metal Bar Type - Brake Fuel Hoses - Instructions