Additional Information

75tonne Hydraulic Press Premier Floor Type Sealey YK759F

Frame head fitted with ram pressure gauge. Supplied with flat pressing plate/V-blocks. Steel frame construction with 2-speed hydraulic pump unit. Sliding hydraulic ram assembly gives 285mm of lateral travel for off-centre pressing applications. Sealey YK759F Hydraulic Press Premier 75tonne Floor Type.

Product Specifications
Model No: YK759F
Model ID: 14839
EAN Barcode: 5051747381193
GTIN Barcode: 05051747381193
Bench or Floor Mounting: Floor
Type: Hydraulic
Capacity: 75tonne
Ram Stroke: 250mm
Extension Screw: -
Lateral Ram Travel: 285mm
Maximum Height - Ram to Table: 884mm
Minimum Height - Ram to Table: 68mm
Table Aperture: 251/201mm
Working Table Depth: 279mm
Working Table Width: 800mm
Overall Height: 1923mm
Gauge Included: Yes
Working Pressure: -
Air Consumption: -
Weight: 436kg

About Sealey
Sealey are one of the largest suppliers of garage & workshop equipment in the UK. They are one of the UK’s leading suppliers of workshop tools and equipment, providing some of the best products, great value and a service that is second to none. With over 30 years experience in the industry they are the choice of the professional. Sealey’s tools and equipment are primarily for use in the automotive environment; however, the range is so vast that it covers a wide range of markets and applications. They sell through a network of local, independent dealers. These dealers stock fast moving items and are able to help with product selection, advice and maintenance where necessary.

This is another successful product from the Sealey Group. We are sure you will appreciate the performance of this superbly manufactured product. Sealey have a catalogue of over 7100 other quality products available.

Before attempting to operate the Sealey YK759F Hydraulic Press Premier Floor Type 75Tonne, carefully read through the entire instruction manual, to understand the applications limitations and potential hazards associated with this bench press. Failure to do so could lead to serious personal injury. Take note of the important safety instructions. Your hydraulic press has many features that will make your job faster and easier. Performance and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Sealey Hydraulic Presses are designed to work in a demanding professional environment. With the application of stringent design parameters and utilising high performance, modern materials and manufacturing processes, Sealey Presses have been developed for optimum functionality and practical application. Sealey’s ethos of “Quality Products at Competitive Prices with a Professional Back-up Service” is renowned for being the best in the business. All Sealey Hydraulic Presses are covered by a minimum 1 year parts and labour guarantee.

Hydraulic presses are potentially dangerous equipment, which if not used correctly can cause serious injury to the user. The user bears sole responsibility for any damage or injury that may result from the use of the bench press for any purpose other than it was intended. Presses should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the press.

GENERAL SAFETY
Familiarise yourself with this products application and limitations, as well as the specific potential hazards peculiar to the press. Maintain the press in good condition (use an authorised service agent). Replace or repair damaged parts. Use recommended parts only. Non authorised parts may be dangerous and will invalidate the warranty. Keep the press clean for best and safest performance. Locate the press in a suitable working area for its function, keep area clean, tidy, free from unrelated materials and ensure there is adequate lighting. Ensure the workpiece is correctly secured before operating the press.
WARNING! Always wear approved eye or face protection when operating the press. Remove ill fitting clothing. Remove ties, watches, rings, loose jewellery and contain long hair. Keep hands and body clear of the work table when operating the press. Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip steel toe-capped shoes/boots. Keep children and unauthorised persons away from the working area. DO NOT operate the press if any parts are missing as this may cause failure or possible personal injury. DO NOT use to compress springs or any other item that could disengage and cause a potential hazard. DO NOT stand directly in front of the loaded press and never leave a loaded press unattended. DO NOT force the press to achieve a task it was not designed to perform. DO NOT make any modifications to the press. DO NOT adjust or tamper with the safety valve. DO NOT exceed the rated capacity of the press. DO NOT apply off centre loads. DO NOT allow the workpiece or the arbor plates to fall from the press working bench. DO NOT get the press wet or use in damp or wet locations or areas where there is condensation. DO NOT operate the press when you are tired, under the influence of alcohol, drugs or intoxicating medication. When not in use release pressure from the pump and clean the press. Stand or store the arbors in a safe location. WARNING! Always position the press against a wall. If the press is situated in the open workshop, it is essential that a guard be placed at the rear of the unit. This will prevent injury to bystanders in the event of the work piece ejecting suddenly. WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be applied by the operator. DANGER! The press is top heavy. If it requires moving after assembly or for relocation, use suitable slings around the top crossbeam, or lift direct with a forklift with the forks located under the top crossbeam. DO NOT use a pallet truck.

GENERAL INFORMATION
Steel frame construction with hydraulic pump unit. Sliding hydraulic ram assembly with lateral travel for off-centre pressing applications. Fitted with ram pressure gauge. Supplied with flat pressing plate/V-blocks.

INSTALLATION.
Securely attach the press to a flat, firm, level surface taking into account clearance for working pieces. DANGER! The press is top heavy. If it requires moving after assembly or for relocation, use suitable slings around the top crossbeam, or lift direct with a forklift with the forks located under the top crossbeam. DO NOT use a pallet truck.

DANGER! Press’s are purpose designed to withstand greater loads than the hydraulic units can develop. For safety reasons, always ensure the workpiece is secured on the table to ensure loads that flex will not suddenly “give” causing danger to operator or damage to component. Ensure you have read and understood safety instructions. WARNING! DO NOT apply off centre loads. When work is complete turn the release valve anti-clockwise to release the pressure and the piston and the ram head will retract automatically. Always keep the piston retracted after use. Disconnect the air valve from the air supply.

Purge hydraulic system.
Before operating the press, the hydraulic system may require purging in order to eliminate any air that may have built up during transit. Open the release valve by turning anti-clockwise and pump the handle several times. Should the system malfunction at any time, repeating this procedure may resolve the problem. DANGER! Press’s are purpose designed to withstand greater loads than the hydraulic units can develop. For safety reasons, always ensure the workpiece is secured on the table to ensure loads that flex will not suddenly “give” causing danger to operator or damage to component. Ensure you have read and understood safety instructions.

MAINTENANCE
Maintenance and repair must only be carried out by qualified person. Contact your Sealey dealer for details. Always keep the press clean, dry and lubricate all moving parts at regular intervals. When not in use always store in a dry location with the piston retracted. Should you need to check or replace oil ensure piston is fully retracted. Remove the oil reservoir filler plug and top up using Sealey hydraulic jack oil. DO NOT use brake fluid. Contact your local Sealey dealer for details. After filling purge the system to remove any air.

SAFETY NOTE
WARNING! Always wear approved eye or face protection when operating the press to protect from flying debris such as particles of metal, rust, dirt and fluids. Stay alert, watch what you are doing and use common sense when operating this equipment. Do not use when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating the press may result in serious personal injury.

See .pdf documents below for full details of parts and instructions.

Sealey YK759F Hydraulic Press Premier 75tonne Floor Type - Instructions

Sealey YK759F Hydraulic Press Premier 75tonne Floor Type - Parts