Additional Information

The Sparky BM21060CE Plus Paddle Mixer available in 230 volts or 110 volts is designed for the most demanding jobs in adverse environments in the engineering and construction industries as well as being suitable for the aspiring home enthusiast. The Sparky mixer range offers convenient and reliable machines for all types of mixing.

Sparky Power Tool Brochure 2010

Sparky Power Tool Accessories 2010

This Sparky power tool will more than satisfy your expectations. It has been manufactured under stringent Sparky Quality Standards to meet superior performance criteria. You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.

PADDLE MIXER SAFETY

WARNING:
Before attempting to operate the Sparky BM21060CE Plus Paddle Mixer 1050w the following basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury.  Carefully read through the entire instruction manual before using your new Sparky power tool to understand the application, limitations and potential hazards associated with this tool. Take special care to heed the warnings. Your Sparky power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Paddle mixers are potentially dangerous machines, which if not used correctly can cause serious injury to the user, bystanders and damage to property.

Paddle mixers should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the mixer.

Always ensure that the paddle mixer is disconnected from the mains before carrying out any maintenance, cleaning, replacement of bits, or any adjustments or maintenance.

Under normal operation, the paddle mixer is designed to produce vibration. Securing screws can vibrate loose easily, causing a breakdown or accident. Check the tightness of all screws carefully before and during operation.

PERSONAL SAFETY

Two handed operation required. This machine requires the use of two hands to ensure safe operation.

Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sunglasses are NOT safety glasses. It is also highly recommended that your wear a dust mask, thickly padded gloves and safety shoes or boots for appropriate conditions to reduce the risk of personal injuries.

Avoid accidental starting. Ensure the switch is in the off position before plugging in. Remove any adjusting key or wrench before turning the power tool on. Do not overreach. Keep proper footing and balance at all times.

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension lead suitable for outdoor use.

The Royal Society for the Prevention of Accidents (RoSPA) recommends the use of an RCD to reduce the risk of fatal shock. For electrical safety it is recommended to always fit an RCD when you use power tools. You can have an RCD fitted to protect a particular circuit as part of the socket outlet between the socket outlet and the equipment being used. For greater safety when using electrical equipment use a residual current device (RCD). Care in use is still necessary.