Sparky rotary and demolition hammers are designed for a wide variety of different uses. The current range covers several classes of hammers from 2–7 kg with Demolition Hammer Breakers up to 32 kg. The High Power Mode in the hammer drills upper range gives increased impact action, the electronic system is equipped with speed pre-selection control (E) with increased impact rate/energy (CE) The Anti Vibration system keeps vibration to a minimum with hinged and sprung handles and suspended motors. New: Wide range of accessories including SDS-plus, SDS-max and Hex, Drill bits, chisels and spades. Industry standard fitting for Sparky and all other professional machines.

Product Specifications
Sparky K306E 650w Demolition Hammer Breaker 230v/110v
Manufacturer Sparky
Model No: K306E
EAN Barcode: 4021757017680
GTIN Barcode: 04021757017680
650w Demolition Hammer Breaker 230v/110v
Light, compact chiselling hammer
Electronic speed pre-selection
Pneumatic high-performance hammer mechanism
Position chisel adjustment
Unique impact mode up to 6J
Lock-on switch
Ergonomic soft-grip handle
Closed D-handle for added safety and comfort
Auto-stop brushes
Double insulation
Technical Data:
No load impact rate (rpm): 0-3200 min–1
Impact energy: 6 J
Tool holder/bit length: SDS-plus mm
Chisel positions: 12
Weight: 3.6 kg
Power input: 650 W
Comes complete with: Plastic case, Flat chisel, Point chisel

Breaker hammers are potentially dangerous machines, which if not used correctly can cause serious injury to the user, bystanders and damage to property.

This Sparky K306E demolition breaker hammer is intended for chipping, chasing, scaling and demolition and should not under any circumstances be used for any other purpose.

The user bears sole responsibility for any damage or injury that may result from the use of the breaker hammer for any purpose other than that for which it was intended.

Breaker hammers should not be operated by persons under 16 years of age, or persons whose stature and strength will prevent the safe operation of the breaker.

Always ensure that the breaker hammer is disconnected from the mains before carrying out any maintenance, cleaning, replacement of bits, or any adjustments or maintenance.

Be sure that the bit is secured in place before operation.

Under normal operation, the demolition hammer breaker is designed to produce vibration. Securing screws can vibrate loose easily, causing a breakdown or accident. Check the tightness of all screws carefully before and during operation.

In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will thin the grease and improve lubrication.

Operate your breaker only after having positioned the demolition tool on your work surface. Stop hammer immediately when the material breaks up.

Use only short strikes (a maximum of 10-20 seconds), then remove hammer and choose new angle or position of attack. If the tool heats up, allow the tip or cutting edge to air-cool.

Use a gradual approach to breaking up material section by section. Start at the edge of large pieces, then work in towards centre.

Tool reconditioning: Dull tips or edges or damaged tools can be reconditioned with milling, planing or lathing.

Two handed operation required. This machine requires the use of two hands to ensure safe operation.

When using power tools that can expose the operator to high levels of vibration, it is possible that the operator might develop “vibration white finger disease” (Raynaud syndrome). This condition can reduce the sensitivity of the hand to temperature as well as producing general numbness. Prolonged or regular users of breaker hammers should monitor the condition of their hands and fingers closely. If any of the symptoms become evident, seek immediate medical advice.

Hold the breaker hammer using the insulated gripping surfaces when performing an operation where the cutting tool may contact hidden cables. Contact with “live” cables will cause exposed metal parts of the tools to become “live” and could result in the operator receiving an electric shock.

Power tool plugs must match the outlet. Never modify the plug in any way. Do not expose power tools to rain or wet conditions. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension lead suitable for outdoor use.

The Royal Society for the Prevention of Accidents (RoSPA) recommends the use of an RCD to reduce the risk of fatal shock. For electrical safety it is recommended to always fit an RCD when you use power tools. You can have an RCD fitted to protect a particular circuit as part of the socket outlet between the socket outlet and the equipment being used. For greater safety when using electrical equipment use a residual current device (RCD). Care in use is still necessary.

Wear ear protectors when using the breaker hammer for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.

Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sunglasses are NOT safety glasses. It is also highly recommended that your wear a dust mask, thickly padded gloves and safety shoes or boots for appropriate conditions to reduce the risk of personal injuries.

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Avoid accidental starting. Ensure the switch is in the off position before plugging in. Remove any adjusting key or wrench before turning the power tool on. Do not overreach. Keep proper footing and balance at all times.

About Sparky
Sparky Professional Power Tools are designed for the most demanding jobs in adverse environments in the engineering and construction industries as well as being suitable for the aspiring home enthusiast. The quality of the products, manufactured by Sparky Group has made Sparky one of the top selling brands around the globe today. Sparky is one of the most rapidly growing power tool brands in Europe. With nearly 50 years of manufacturing experience, a 40 acre European manufacturing plant and a committed and highly qualified workforce, Sparky continues to produce the high quality and design of power tools that has established Sparky as a brand leader amongst the world’s top selling power tool brands.